Multiflash

Multiflash - Multiflash

This 5 in 1 roof flashing is designed to open and peel to 5 vent pipe sizes. Multiflash is suitable for roof pitches from 16° to 45°.

Important features are:

Product data

Suitable pipe sizes	31,75 mm = 1.25” \| 38,1 mm = 1.5” \| 50,8 mm = 2” \| 76.2 mm = 3” \| 101.6 mm = 4”
Colour	Black

If replacing an existing flashing remove existing part before installing the Multiflash.
Determine the size of the vent pipe.
Match the pipe size with the correct tear line on the Multiflash.
Break the seal with a dull object, and clear away the redundant material by hand.
Carefully lift the shingles that will be used to cover the upper half of the Multiflash. Push the Multiflash over the vent pipe and secure the flange to the roof deck with roofing nails.
Replace the shingles removed earlier, and secure over the top half of the flange.

Do not use a sharp instrument to pierce or cut the Multiflash seal.
Not to be used with petroleum-based sealants. Use only EPDM compatible sealants!
Suitable for cold weather applications, use caution during installation in extreme conditions.
Adhere to installation requirements as determined by the local regulatory authorities.